MON - FRI 8AM - 5PM, SAT 8AM-1PM
+254 722 848 585 | +254 735 633199

Cementous based

Cementitious is an ideal flooring system for renovating or improving any old floor surface, especially one that may badly damaged or worn. It can also be used to raise the floor level of a project quickly and evenly. This type of concrete is particularly fast in drying and can be fully operational for heavy vehicle traffic within 24 hours.

Self Levelling Cement Compound

Self Levelling Cement Compound

Packaging: 25 Kg Bag
Coverage: Approximately 1 litre per sq mtr/mm thickness.

1. Levelling rough concrete floors by a cement topping.
2. Finds it’s on level
3. A very smooth surface is created
4. After application can be covered by subsequent floor finishes like ceramic tiles, PVC vinyl flooring, laminates and wooden floor.

Kentop Hard

Concrete Floor hardener
Packaging: 25 Kg Bag

Coverage:
Medium duty wear 6kg/sq.meter
Heavy duty wear 8kg/sq.meter

1. Applied as a dry shake over fresh concrete.
2. Hard wearing surface for heavy traffic.
3. Can be applied indoor and outdoor.
4. If power floated gives a perfect leveled and smooth concrete

Skim coat – wall coating

Smoothening wall Finish

Packaging: 25 Kg Bag
Coverage: Approximately 1.3 Sq.m per Kg depending on the thickness to be applied.

1. Smooth textured substrates
2. Adhere on plastered Surfaces
3. Can be painted on after 24 hours
4. Filler & joint compound
5. Up to 5mm coat
6. Can be coloured

Cementous Based

Cementous waterproof coatings are typically two-component blends used behind tile, over masonry patching, and over concrete surfaces.
 

KENSEAL 1K

A cementious chemical waterproofing for Stone Walls & Brick Works. To be applied on the positive side. Can be used also on Concrete, Light Weight Thermablocks. Ideal for water tanks & ponds and Safe for potable water.

Packaging: 18 Kg

Coverage: Approximately 1 to 1.5 Kgs per Sq.mt per coat depending on the surface to be applied on. Two coats application.

HYSEAL Waterproof Cement

This Hyseal Waterproof cement is a blend of active chemicals to waterproof any concrete structure by way of a reaction acting on the cement particles and water in the concrete thereby forming insoluble crystal in the pores of the concrete to block the passage of water. It is most active when mixed with the concrete or mortar in the mixer.

Packaging: 1 Kg
Coverage: 1 Kg Bag to be added with 50Kg of Cement

Benefits
1. Economical waterproofing solution to reduce water absorption.
2. Compatible with all sorts of concrete & plaster enders
3. Works best with concrete structures